TFPC 24, 25, 26 (Wireless Internet, YouTube, Injection Molding)

24.  Wireless internet

25.  YouTube
A million monkeys with a million camcorders will generate more garbage than can possibly be imagined.  Fortunately, there are a million OTHER monkeys pre-sorting it for me.

26.  Injection molding
Okay, not new, but the last few years have seen an EXPLOSION of inexpensive goods come from China's vast injection molding farms.  I'm not a big fan of cheap plastic crap, but there is some REAL gold hiding in that sludge.  The inspiration for this was the ease and low cost of putting together some really awesome mobile making kits lately.  Will post more anon, with pictures.

Comments

Post a Comment

Popular posts from this blog

18 Essential Skills for a Maker

@AntonOlsen recently posted an article on GeekDad enumerating 100 Essential Skills for Geeks. As he was inspired to do so by a list of "Essential Skills for Men", so I am inspired to make this list of essential skills for Makers. His list was a little long (100 items), terse (essentially one line per item, but with links), and slightly biased (heavier on computers than I might have liked, but to be fair, that is the most common geek fetish). I'm going to go for a shorter list, with slightly more verbose entries, and try to cast a wider net. If I get interest from this list, I'll follow up with an article on each point going into more detail. 1. Calculate power consumption and estimate battery life - Most electrical projects will involve batteries of some sort. Having an idea of how long your project will run on a battery can save you a lot of trouble later- that wireless garden soil moisture monitor is probably not going to run very long on a 9V battery. Mayb
Read more

Breadboarding the Arduino- part 1

A few weeks ago, I purchased 10 Atmega328P's from Mouser , naively thinking it would be easy enough to get them working on a breadboard as an Arduino sans the fancy (expensive) board. I was planning to use an FTDI USB to TTL serial data cable to bootload (I bought a 5V one, then realized that the two 3.3V ones I already had would work fine- lesson one of this saga). I also bought a some 16MHz crystals and the appropriate capacitors. At this point, I want to extend my thanks to whomever it was that decided a 6-pin AVRISP compatible ICSP header would be a value-add to the Arduino. I know that 95% of the Arduino users out there will NEVER use it, but I am very grateful. So, first hurdle- I figure I'll take one of the 328s and upgrade my Arduino (it was one of the, what, six? Duemilanove's that shipped with a 168 from the factory). Supposedly, the Arduino IDE has the capability of loading the bootloader onto a blank chip through an AVRISP, but I'll be buggered if I co
Read more

In Which I Create A Kerfuffle

Image
Caveat lector--this post has nothing  to do with making anything. Except the aforementioned kerfuffle. First things first--I am absolutely aware of my privilege. I'm a cis, hetero white man, of unexceptional girth and slightly more than average height. I have no scars, no birthmarks, no differences of ability which would draw the eye. In short, I'm playing the Game of Life on the lowest possible difficulty level, and damn lucky for it. So. A few months ago (right before Hogswatch  Christmas), I decided to start painting my fingernails. I've always wanted to--or, at least, since I was at least a preteen--but I've never had the courage to do it. I'm not prone to an action such as this simply for attention or to be "different". I simply realized that, for the first time in my life, I was comfortable enough with myself and my life to scratch a long-denied itch. My beautiful wife bought me many varieties of polish, and I've been painting my
Read more